E192.01, DC motor full bridge 1a
This IC combines several key functions of DC Motor Controller used in an automotive under-hood application. It contains all function blocks to run the motor bidirectional or to brake it. more Info
E520.01, 12-fold low side driver with stall detection
The E520.01 is conform to automotive and industrial needs. It provides a “Stall Detection” for the end position shut-off of stepper motors. For adapting LED dimming of the drivers to the ... more Info
E520.02, 12-fold low side driver
The E520.02 is conform to automotive and industrial needs. It provides short circuit protected output stages for up to 3 unipolar stepper motors. For adapting LED dimming of the drivers to ... more Info
E520.03, 8-fold low side driver with stall detection
The E520.03 is conform to automotive and industrial needs. It provides a “Stall Detection” for the end position shut-off of stepper motors. For adapting LED dimming of the drivers to the ... more Info
E523.01 / E523.11, B6-bridge fet driver with V-regulator and LIN/PWM-interface
This IC is developed for automotive and industrial applications to control 3 NMOS half bridges for driving EC motors, DC motors, relays, lamps, and LEDs. Alternatively it controls 6 NMOS ... more Info
E523.02 / E523.12, Full Bridge FET Driver with V-Regulator and LIN/PWM-Interface
This IC is developed for automotive and industrial applications to control 2 NMOS half bridges for driving DC motors, relays, lamps, and LEDs. Alternatively it controls 4 NMOS lowside FETs or ... more Info
E523.30-35, Power LIN2.1 or PWM-interface stepper with stall detection
This IC is designed to drive one bipolar stepper motor. The IC is intended to be placed inside the motor itself. The stepper motor coil currents can be controlled by the integrated μC and a ... more Info
E910.01, Low side driver (8 Channel, Serial Interface)
The IC is developed for automotive applications and can also be used in several other application areas. The IC is well suited to drive relays, lamps, bus systems etc. with medium power ... more Info
E910.06, Dual ripple detector for Power Windows
The Dual Ripple Detector (DRD) originally developed for power window applications, can be also used in conjunction with a microcontroller to operate two DC motors in an automobile. The DRD ... more Info
E910.16, DC motor linear FET controller
The IC controls the voltage across a DC fan motor as a function of the voltage applied to the control input “SOLL”. The IC delivers the gate voltage for one or two (parallel) external ... more Info
E910.69, EC motor 3 x half bridge controller, high performance
The E910.69 is an universal IC for 3 phases full and half bridge applications and is best suited for brush less DC motor control applications. Each of the external half bridges is controlled ... more Info
E910.72, DC motor 6 x half-bridge driver with pulse count
The E910.72 allows independent positioning of up to 5 DC motors. Pulse detection circuits convert the commutation current of the motors into countable digital signals especially for ... more Info
E910.87, EC motor 3x half bridge controller, universal
The E910.87 is a universal ASSP to drive three independent power FET half bridges. This IC contains all supply, safety and drive functions to drive the n-channel power FET bridges. Three ... more Info
E981.15, VirtuHall® - BLDC motor controller with Sensorless commutation
The E981.15 is a universal ASSP for brushless DC motor control applications. It comprises drivers/controllers to drive 6 N-channel power-FETs with PWM frequencies up to 60kHz. VirtuHall® ... more Info
Folge uns auf twitter
Schaue uns auf YouTube an
Besuche uns auf Xing