E520.32, Integrated smoke detector control with Bus Interface
The device provides a high current driver for a transmitter
LED and a high impedance current to voltage conversion
for the photo current of the receiver diode. Fast response of both ...
more Info
E520.33, Digital sensor signal processor with SENT interface
This configurable signal conditioning IC provides sensor signal amplification, digital compensation, and linearization for sensor signals. Configuration and calibration
information is ...
more Info
E524.03, Digital ultrasonic transceiver driver and signal processor
This IC enables ultrasonic range detection with a single transceiver. A transmitter channel provides programmable power and frequency to a center tapped transformer. The receiver channel ... more Info
E524.11, E524.12, E524.13, E524.14 - E524.21, E524.22, E524.23, E524.24, LIN smart ultrasonic parking assist
The E524.xx with integrated microcontroller offer ultrasonic
range detection with minimum component count. A single ultrasonic transducer with a center tapped transformer is directly ...
more Info
E524.50, Integrated AMR current sensor - IACS
The E524.50 current sensor family is designed for highly dynamic electronic measurements of DC, AC, or pulsed currents with integrated galvanic isolation. This current sensor based on the ... more Info
E910.44, Hall sensor IC
This IC contains a Hall sensor and two high gain, chopper stabilized comparators forming a window comparator. It evaluates the magnetic field component perpendicular to the device surface. ... more Info
E910.62, Integrated circuit for digital PIR detectors
The E910.62 integrated circuit is designed for interfacing Passive Infra Red (PIR) sensors with micro-controllers or processors. A single wire Data Out, Clock In (DOCI) interface is provided ... more Info
E910.85, Side airbag pressure sensor
The E910.85 Pressure Sensor Unit (PSU) contains all functions required for air pressure measurement with the SM1376 piezoresistive pressure sensor. The signal processing path consists of ... more Info
E910.86, Integrated Solar angle sensor
The integrated sensor system E910.86 provides three
sensing functions in one, ultra small optical package:
- the angle of light incidence in both xz- and yz-planes (z axis ...
more Info
E910.97, Integrated circuit for smart PIR sensors
The E910.97 integrated circuit combines all required functions for a single chip Passive Infra Red (PIR) motion detector. Motion detection is signaled through the push-pull REL output. A ... more Info
E931.06, Integrated circuit for digital PIR detectors
The E931.06 integrated circuit is designed for interfacing Passive Infra Red (PIR) sensors with micro-controllers or processors. A single wire Data Out, Clock In (DOCI) interface is provided ... more Info
E931.97, PIR controller IC
The E931.97 integrated circuit combines all required functions for a single chip Passive Infra Red (PIR) motion detector. Motion detection is signaled through the push-pull REL output. A ... more Info
E981.07, Two channel sensor interface PSI5
The E981.07 manages the connection and communication between a microcontroller unit (MCU) and up to six sensor satellites. It can be applied for example in a vehicle passenger restraint ... more Info
E981.08, Four channel sensor interface PSI5
The E981.08 manages the connection and communication between a microcontroller unit (MCU) and up to twelve sensor satellites. It can be applied for example in a vehicle passenger restraint ... more Info
E981.17, 4 channel squib driver
The Four Channel Squib Driver ASSP E981.17 is designed specifically for automotive airbag applications. The IC provides individual control and diagnostics for 4 floating squibs. It has two ... more Info
E981.18, 8 channel squib driver
The Eight Channel Squib Driver ASSP E981.18 is designed specifically for automotive airbag applications. The IC provides individual control and diagnostics for 8 floating squibs. It has two ... more Info
E984.01, Calibrated absolute pressure sensor
The E984.01 is an high speed, amplified and calibrated absolute pressure sensor in one surface mounted package based on JEDEC SOIC 20. The Si-MEMS sensor is attached in a package cavity and ... more Info