E520.13, HS-CAN transceiver for partial networking
The E520.13 CAN transceiver is a physical interface for high speed CAN bus applications. It provides enhanced local and remote wake up capabilities in an SOIC14N package.
Common remote ...
more Info
E520.34 / E520.35, LIN SBC with voltage regulator and watchdog
The LIN-SBC with voltage regulator provides a LIN tranceiver, the peripheral supply, reset generation for the μC and a watchdog. The LIN-SBC can be switched into standby- and sleep-mode ... more Info
E910.05, K-BUS transceiver
The IC is designed for communication via bidirectional serial data channels. In addition to the level conversion of transmit and receive signals from the microcontroller’s voltage level to ... more Info
E910.15, LIN-/K-BUS transceiver
The IC is designed to control bidirectional serial data transmission on bus lines. It supports both LIN- and K-Bus which are selected by the MODE pin. This feature allows an easy migration ... more Info
E910.18 / 45, LIN transceiver with voltage regulator
The IC is designed for LIN slave applications. The microcontroller is completely protected from the harsh automotive environment. Both devices contain all functionality to supply and ... more Info
E910.48, LIN SBC with voltage regulator and watchdog
The E910.48 is a physical LIN interface. Additional functions extend this device to a complete System Basic Chip (SBC) for use together with any μC in an automotive environment. A flexible ... more Info
E910.54, BASIC FlexRay™ transceiver
The low cost basic FlexRay™ transceiver is part of the electrical, physical layer in a FlexRay™ communication network. The E910.54 provides an interface between the twisted pair physical ... more Info
E910.56, Monolithic FlexRay™ star coupler
The star coupler is part of the electrical, physical layer in a FlexRay™ communication network. The E910.56 provides interfaces to connect up to four branches of twisted pair physical bus ... more Info
E981.03, KNX / EIB transceiver
The E981.03 is a physical layer KNX / EIB Transceiver with integrated protocol handling and voltage regulators. A configurable maximum KNX bus load (max. bus current and current slew rate) ... more Info
E981.05, LIN SBC with voltage regulator and watchdog + relay driver
The E981.05 LIN System Basic Chip (SBC) combines many functions required for MCU based automotive networks. It communicates with the MCU via an SPI compatible interface. Two rugged low side ... more Info
E981.07, Two channel sensor interface PSI5
The E981.07 manages the connection and communication between a microcontroller unit (MCU) and up to six sensor satellites. It can be applied for example in a vehicle passenger restraint ... more Info
E981.08, Four channel sensor interface PSI5
The E981.08 manages the connection and communication between a microcontroller unit (MCU) and up to twelve sensor satellites. It can be applied for example in a vehicle passenger restraint ... more Info
E981.10, Basic IO-link™ transceiver
The IC is intended to be used as transceiver in IO-Link and SIO-mode applications in sensors and actuator devices. The communication and the power supply work across 3 separate lines to the ... more Info
E981.12, Dual IO-Link™ master transceiver
This device comes with two independently operating IO-Link MASTER PHYs which make it a perfect fit for 2/4/8/16-port Master applications. Especially for multi-port applications the integrated ... more Info
E981.55, FlexRay™ Transceiver
The E981.55 is a FlexRay™ node transceiver fully compliant with FlexRay™ electrical physical layer specification v3.0. It operates as a bi-directional interface between the FlexRay™ ... more Info
E981.56, 2nd generation 4-branch FlexRay™ star coupler
The star coupler is part of the electrical, physical layer in a FlexRay™ communication network. The E981.56 provides interfaces to connect up to four branches of twisted pair physical bus ... more Info